Questions & Answers for: Harley Davidson FXDBI Street Bob swing arm

Ad

Question about Harley Davidson FXDBI Street Bob Motorcycles

1 Answer

...cover, (careful of the cam position sensor wire, as it will be connected) and you will be able to swing the cover out of the way, and see the outer tensioner. 3. Gentle is the key here, as the ...

Ad

Question about 2006 FXDBI Street Bob

1 Answer

How do I remove the fuel gauge from the tank? Hi Troy, you could have a faulty sending unit or guage, there could be a problem with your wiring. On models with the fuel gauge posing as a left hand ...

Ad

the light does not work or the fuel gauge works it stays on empty When the ignition switch is ON the fuel gauge is connected to 12 VDC, current flows through the gauge and the variable resistor in the

Question about 2006 FXDBI Street Bob

1 Answer

...schematic, service manual does not really show much. Right side insert axle through adjusters in swingarm then brake caliper support arm then short spacer then into bearing in wheel then there is

Question about 2006 FXDBI Street Bob

1 Answer

...swing arm into a short spacer, through right wheel bearing, internal spacer, left wheel bearing out the left side through a longer spacer, and then the swing arm and then on the axle you will have a ...

Question about 2006 FXDBI Street Bob

1 Answer

how to replace a gas tank fuel float Remove console, disconnect electrical connectors, remove vent hose, remove and discard screws and washers and open fuel tank top to access and remove fuel pump and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...