printer won't display tray 3 options in any menus, so it looks like your printer recognizes that it is there. The micro-switches that detect "open drawer" or "no paper" in tray 3 may be malfunctioning
Question about imageCLASS MF5550 All-In-One Laser Printer
paper tray. Push the paper tray back in and switch on the machine with no paper in it. When it's finished warming up it should tell you the tray is empty. Then put paper in. This will usually clear it
Question about LaserJet M4345 MultiFunction Printer
...switch to the next bin when the first is empty on the hp LaserJet 4345 mfp. Touch MENU, then scroll to CONFIG DEVICE then to SYSTEM SETUP then to TRAY BEHAVIOR then to the top setting set it to FIRST ...
Question about LaserJet M4345 MultiFunction Printer
...setting trays to switch to the next bin I need to find the Help for setting trays to switch to the next bin when the first is empty on the hp LaserJet 4345 mfp. In Printer Properties set trays to ...
Question about LaserJet 3800n Printer
... I can only print from Tray 1 when I manually switch printing to Tray 1. check the paper type and the paper size from the printer menu, if it is ok then you will try to check the paper sensor on tray ...
...SWITCH 490: MP TRAY EMPTY Print job from MP Tray has been received and the MP Tray is empty. Load the requested media (mmm) in the MP Tray and press ON-LINE. Check your print driver settings and see ...
Question about X464DE Mono Laser MFP, 38ppm A4 Mono, Print/Scan/Copy/ Fax, Duplex, USB/Ethernet Interface, ... All-In-One Printer
...printer switch from empty paper tray How do I have printer switch from empty paper tray 1 to the full 550 paper tray 2 Make sure the paper type and size in both trays are the same. If you are using ...
Question about X464DE Mono Laser MFP, 38ppm A4 Mono, Print/Scan/Copy/ Fax, Duplex, USB/Ethernet Interface, ... All-In-One Printer
...printer will automatically switch to drawer 2 to supply the paper. You might need to install the tray 2, to do it go to, properties>install option. then choose the right driver and install, after ...
...switch to Tray 3 (bond). Need to Configure HP 4050 printer to prompt 'load paper' when tray 2 is empty. Both trays have letter size. You'll have to change the paper TYPE of tray 3 to a different type ...
...printer control console that indicates which output tray is full. • In automatic switching mode, the system automatically switches over to the second tray (if it is empty) when one tray is full ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions