Questions & Answers for: switch standby control sony tv

...dead with red standby light on, but won't switch back on, comes back on it's own, won't respond to remote or local controls Low 5v standby supply due to diode D869 faulty, check by ...

...standby which seems the outcome of the switch on the side of the set and aon the remote? The only way I have found is to pull the mains lead out! are you using the original sony remote control ? can ...

...Standby light on Sony TVs blinks 16 times is abnormal I thiks. It may come up to 8 blinks or so. You jsut switch off the set by AC mains switch at the front panel, switch it again with it and count ...

...standby light denotes some problems inside the circuit board of that TV. The number differes with the section where the fault is. According to the number of blinks, we can reach to fault point easly. ...

...standby light on Sony TVs are fault symptoms. You just count the number of blinks exactly and keely, for switiching the tv with its FRONT PANEL POWER ON-OFF SWITCH; and not by the remote control ...

...standby light in Sony sets are fault indications. You just count the number of blinks occur at a time, by switching the set ON-OFF by its front panel power switch, not by the remote control handset. ...

...switch to standby and keep tha standby light flashing. Hello Standby light blinking is a fault indication in Sony sets. You just count the exact number of blinks at one time, after switching on and ...

standby light on Sony TVs are fault indications. You just count the number of blinks and get that number to me. Just do it by switch ON/OFF your tv with its front panel power switch; not by the remote

...standby light blinks when you turn ON the TV by its Power Switch at it front panel. If blinks, count the number of blinks. Check this for more details about the blinking codes to Sony Wega TVs. If it ...

...the sony bravia KLV 40BX400 to switch on and then switch off immediatelly. The standby light then flashes 6 times between intervalls 6 flahes indicates a panel error possibly the backlight ...