...work. OR you can try cleaning the Variable Valve Solenoid next to the P/S pump. Most of us run full synthetics in our 4.2's. Note* if it IS dirty oil, just changing it will turn the light off pretty ...
oil level. 2. Do not use synthetic lubricant in axles using RTV sealant. Synthetic lubricant will chemically atack RTV sealant. 3. Identification: check tag on case. I have the same model and it takes
...oil capacity is 4.5 quarts. It's actually ~7 quarts (6.97 quarts) for the V6, 2001-2009 and 6 quarts for the V8, 2003-2009. 5W-30 (preferred), synthetic for temps below -29 C (-20 F). Happy
...oil used, be sure it meets GM 6094 Spec. If its not synthetic, its not good enough. you can also turn the ignition switch to run and pat the gas pedal 3 times within 5 seconds. the oil change light ...
...damaged from additional heat. I recommend that you always use a high quality fluid. (I prefer synthetics....expensive but have proven to be far superior to conventional
...MY 2002 CHEVY TRAILLAZER WITH OVER 150,000 MILES? with this mileage it is a waste to put in 5/40 full synthetic,put in 10/40 semi(the best you can afford)and when the engine starts to burn
...oil to a synthetic blend. The synthetic will clean all the sludge out of there and clog the screens. Also, since it's a temperature problem, check the tightness of your plastic intake manifold bolts. ...
...synthetic oil......nothing in the owners manual about doing this......should I change or keep using the 10-30 I've always used? its mostly personal preferance.. your trailblazer doesnt call for ...
How large is the oil pan or how much oil does a 2002 4.2L chevy trail blazer hold 7 quarts for this engine. Our engine really likes the Mobil 1 fully synthetic.
...oil should I use? Thanks! 75W90 is a good one to use,, remove the plug and fill it to just below the full line ( fill until it overflows then just wipe off the excess and your good to go ) You can ...
Usually answered in minutes!
3,219 Questions
2,541 Questions
1,576 Questions
1,050 Questions
976 Questions