Questions & Answers for: Mitsubishi Lancer tacho

Question about 2003 Lancer

3 Answers

...not visible and needle remains on zero) i had the same problem on my g/f's 2000 lancer GLXi, (with tacho), i fixed the problem by putting a jump wire on the back of the instrument cluster, the fault ...

Ad

99 lancer,speedo tacho n gauge problem. Mitsubishi lancer 1999 dash problem. The speedo, tacho, odo, temp and fuel gauge doesnt work but sometimes works in the morning when its cold..What is wrong and

Ad

i need instructions on how to install a tacho in a 2002 cg lancer i need instructions on how to install a tacho in a 2002 mitsubishi lancer We had tacho installation problem with out 98 lancer with no

Mitsubishi lancer 1999 dash problem. The speedo, tacho, odo, temp and fuel gauge doesnt work goes on and off at different times randomly,. change cluster contacts bad

you mean cluster contacts bad !Whats the solution? mitsubishi lancer 1999 dash problem. The speedo, tacho, odo, temp and fuel gauge doesnt work goes on and off at different times randomly,. Remove the

...with the electronics, all the gauges cut out while driving at random times... this includes speedo, tacho, temp and petrol... anyone no what the problem could be??? loose plug or contact on the gauge ...

Question about 2003 Lancer

1 Answer

My Mitsubishi Lancer 2001 Coupe always got the problem which is the tacho,speedometer, fuel indicator, temperature indicator are not working. They all working only in the morning. So after I drive the

Question about 2003 Lancer

1 Answer

tacho, speedo, fuel, heat not working, highbeam light, oil light and those work The Instrument cluster is partially burnt ....this is caused by the thin metallic strips that are part of the cluster...

Question about 2002 Lancer

1 Answer

2000 lancer 1.5 auto. Tacho works fine when car is not moving but jumps around when driving. I put it up on blocks and put it in Drive and took it up to 100kph and it works fine. Any thoughts please. ...

Were do I hook up tacho wire to dizzy You need to remove the glove box/cubby hole. Remove the ECU cover. Locate the middle of the 3 connectors(orange) and pin 43 on that (orange) plug (3rd hole from ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...