Questions & Answers for: television went bang picture

...bang" the picture went,still have control of the unit,and also sound.Need Help,Footballs coming...... Thanks.... unfortunitly sound is one circuit ,,while all the rest makes a picture. hearing a bang ...

...BANG SO THE PICTURE WOULD GO BACK TO NORMAL. TODAY I TURNED THE TV OFF FOR A COUPLE OF HOURS AND WHEN I WENT TO TURN IT BACK ON, IT WON'T TURN ON? since you have mentioned that you first tap the tv ...

went bang sound no picture techwood twp4210 good day, it seems that something was busted inside your tv, have it checked by a competent technician from techwood or from your seller. i hope this helps

...bang screen went black then came back on and now everything is and blurry red and blue. i took the back cover off and covered each light sepeate, and they all stay blurry except when i cover the red ...

...picture but the sound is good, please help it damaged the crystals in the LCD Panel the only way to fix it to take it back to where u bought it and tell them the screen went out they more than likely ...

...bang' and picture went out. The noise was more mechanical than the type of pop or snap you'd expect if a capacitor blew. The audio is still ok. Depends on the physical size of the cap; there are some ...

...went off with a bang. Now have blank screen but sound is ok. thats the HORIZONTAL OUTPUT SECTION , it could be anything from a FLYBACK TO a HOR OUT TRANSISTOR, need to be taken to a repair shop , ...

...bang and the picture went away with the sound still working then the picture came back for about one minute and then another bang and everything died... unplugged and replugged nothing at all what do ...

...bang no picture tv picture fine then went all green followed by complete picture loss then load bang. tv powers up of standby red to green light on remote but no picture The set really needs to be ...

blown up The tv picture went grainy and blured then went bang It sounds that the LOT {Line Output Transformer] to your TV has damaged. Contact any experienced service technician to get it repaired.