Questions & Answers for: Chevrolet Impala tension

...3.8L) I'm having a heck of a time trying to get the old belt off. Is there a trick to loosening the tension-pully? I'm using a 15mm socket to try to turn the nut on the pulley to move it down, but it ...

instakll belt impala 2005 3.4 rotate tensioner counter clockwise. If you have a digital camera take a picture off the belt to help you when reinstalling. Saves a lot off agro! route the new belt over ...

2000 Impala serpetine belt. The engine pulley doesnt line up with the other pulleys. On the tension pulley it is off buy 3/16 of an inch. It's common for the serpentine tension pulley to fail and will

serpentine belt position have a 2003 impala l need a diagam for the serpentine belt Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2003 ...

need diagram for serpentine belt for chevy imo l s 2003 Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2003 Chevy Impala. ...

small tube coming out left hand side of engine 90 degree towards the back of the engine looks like it goes through the belt tensioner That is the tensioner spring. It is in the tensioner.

How to loosen tensioner on 2006 Chevy impala use a 3/8 drive ratchett and Rotate the drive belt tensioner clockwise in order to release the spring tension. there is a square hole that a rachett will ...

draw out the exact routing diagram of the old belt across the pulleys. 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on

Replace water pump belt on a 3.8 chevy impala diagram You will have to 'untension' the serpentine belt first. Then to reinstall, put the belt on then loosen or 'untension' the belt ...

replacing drive belt tensioner I would like to know how to remove the tension so I can change the belt and removing the tensioner itself Once the belt is off there will not be tension and will be safe