Questions & Answers for: Honda Civic tension

...with whiteout on the cam gear and timing belt so when you put it back you are not off. Loosen the tensioner with a 14mm and remove the timing blet. Use a 10mm socket t oremove the WP bolts. The ...

how do i loosen the auto tensioner on my 02 civic si 2002 Honda Civic SI 2.0L MFI VTEC DOHC 4cyl Place a long-handled, boxed-end wrench or a belt tension release tool (A) on the drive belt ...

fitting a timming belt to an honda civic 1.6 vtec 51 plate how does the belt tension work hi from uk having lined ip timing marks on cogs? fit c/belt anticlockwise from crank pully cog then making ...

do i need a belt tensioner for the serpantine belt? I am replacing the alternator. If the tensioner is still working fine, don't worry about it. These rarely give problems, and are easy to replace, so

...freely. If not it is locked up. If turns freely check the belt may just be a loose belt.. Check the tension of your belts. You might have grease on it tranny fluid,antifreese, or you don't have the ...

...INSTALLATION of timing belt:Fig. 1: View of the timing belt cover Fig. 2: Loosen then timing belt tensioner using a ratchet and short socket Fig. 3: Matchmark the direction of rotation of the

Need to replace A/C tensioner pulley becauase the bearing is bad...how do I do this? u should just replace the whole ac compressor dont waste ur time its cheap at a junk yard 50-75 dollars Do not ...

...belt on a 2006 honda civic Hello georgej562, You will need a long handled box wrench on the belt tensioner from above the engine. Turn the wrench slowly in the direction shown in the pictures

where are the timing marks on a 1994 honda civic 1.5 On the Cam gear are three marks. On the face of the gear it should say "up", then you have three marks one at 3 o'clock one at 7 o'clock ...

How to time the timing belt Before removing the timing belt  bring the engine to the timing marks and if your engine is working ok,then use the marks by using some reflecting paint . Loose the ...