Questions & Answers for: Honda how to test cdi

...test light and check if i had power to my coil and to my cdi module .You more than likely lost powerto one of them .those cdi last for every. check your switch make sure you got power there to. Hope ...

...ohms resistance to ground of black / white wire from CDI to engine stop switch.Postback results of tests. Good luck and thank you for using

...sparking r starting hi i have a 1985 gsxr 400 and only 1 of the coils work when trying to start.i tested the 2 coils sepratly and the bought work that way so it cant be the coils.i was thinking ...

cdi box. to test the stator for voltage take a multimeter on the ac scale and test the output of the stator while kicking the bike over if you have voltage rising and falling then your stator is fine.

...test a CDI box with an Ohm meter , it can test good , and still be bad. The only good way to test a CDI is part swapping with another working bike. Most dealers will not let you return an electrical ...

...is bad... how do I test it to be sure? Thanks Takes special equipment to test the CDI ... does your bike start? run? if not ... there is that possibility that who ever told you it is bad is

to test the cdi or the stator Testing the stator is easy. Just use an A/C volt meter to check there is output from the stator. The CDI is a little more difficult and is easiest checked by substitution

...test the CDI today with a VFR thats currently running eliminating that option. Please help... Check your CDI on the other bike is a good option. if it was perfect before the CDI change then the new ...

...CDI. Your Honda dealership should be able to test this for you, but this may cost as much as a second hand CDI. The CDI on the XR200 is the same as a lot of models eg. cb125, cd125 . You will find ...

...test a cdi box!!! Bite the bullet & buy a NEW one if you want to fix it & forget it.....there are new ones available online from a company in the UK for about $259.00 I speak from personal ...