...cdi, pulse coils,and even the main harness at the same time and yet no spark. I have to walk away or something is getting tore up, Im no ******* and this is a problem ive read from other zx owners ...
...spark. i seem to not be getting power to one of the coils. i replaced the cdi and still nothing, i tested the coils and they tested good. what i need to know is what sends the power to the coils to ...
...checked the plugs against motor and frame. check your spark plugs leads the CDI unit need to be tested for power and make sure that no wires are touching the frame as this could stop your
...in the stator, CDI boxes, and ignition coils. Everything can be tested with a voltage meter accept the CDI box. The CDI box can test good and still be bad. You have to eliminate everything else
...1992 kawasaki ninja 600r.I have been experiancing missing problems,i have changed plugs,wires,coils tested good.I was checking to see if i have inductive ignition or cdi ignition.I have 12 volts at ...
Question about 1996 ZX-6R Ninja
...test and check cables with an ohmmeter if necessary. 12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and CDI box. Spark plug cables in bad condition and ...
Usually answered in minutes!
157 Questions
84 Questions
79 Questions
64 Questions
51 Questions