Questions & Answers for: kawasaki ZZR 250 how to test cdi

...test this without the use of a multitester is to switch the coil with a working coil. If it still doesnt have that spark but works with the other connection. then check the CDI. my zzr 1990 kawasaki ...

...to FixYa, I have a 93 ZZR250. Before considering replacing the engine, perform a compression test. Compression lower than 125 would be a cause of concern and therefore the engine swap would ...

...when i try to start it does nothing, but when i cross over the solenoid with a peice of wire to test it the bike starts up. Its just the start button wont work? Any help would be great!! Check to ...

ZZR250 won't start. fuel tank full. well charged battery. ZZR250 won't start. fuel tank full. well charged battery can turn engine over. no firing. One month back engine can be started. No overheating

my bike can't recharge the batteries, my team said it was actvfire not working well,so,is that any sollution to these problem?..is that i can service these stuff by myself?.. one more thing, my ...

...theres nothin startermotor makes noise but wont start startermotor is failin or has bad connection--test it and chec wiring for titeness and ...

...charging system. Either the battery is in need of replacement or the regulator is fried. One way to test which is at fault is to jump start the bike (be VERY careful doing this as a car battery will ...

...it was raced because had to change the gears from GP style to street. Need to make a compression test on each cylinder in case you need a new cylinder head gasket, test the thermostat and check ...

...has the same, see if that switches the light on. Do you have a permanent live outlet that you can test? If the battery has power and is connected properly and nothing lights up after doing these ...

Kawasaki ZZR250 (EX250H) bike won't start. Bike is okay push to start but won't start with the switch button. The engine is cranking but not starting. What the problem? Thanks Rishan Question edited ...