test the CDI box other than putting it on a know running bike or getting a known good CDI and putting it on your bike. Double check that the spark plug cap is secured to the high tension lead as well.
Question about 2003 RM 125
...not remove any wires or ground wires or disconnected any connections. There is absolutely no spark tested by holding the spark plug in hand while connected and kicking over the bike as hard as ...
...TEST, SO I FOUND A USED ONE FOR THAT TESTED GOOD.THAT DIDN'T WORK SO I REPLACED THE CDI WITH A KNOWN GOOD ONE. TO MAKE A LONG STORY SHORT, I HAVE REPLACED THE STATOR AGAIN, THE CDI AGAIN, THE PICK UP ...
rm125 1999 no spark tested all the wires for shorting and ohms everything is good ive replaced rectifier, coil, main wiring loom, stator coils, on the multi meter im getting 14volts on source coil and
...2008 RM85, I'm experiencing detonation damage to the head, I've check ed the ignition system: All tests were in spec and all though I don't have a peak voltage adapter I am getting a spark, The
...test and check cables with an ohmmeter if necessary. 4. Loose connection at ignition coil or plug between ignition sensor and module. 5. Spark plug cables in bad condition, shorting, leaking, spark ...
Usually answered in minutes!
329 Questions
42 Questions
35 Questions
1 Questions
