Questions & Answers for: test a stater

...stater test O.K. the battery tests O.K. however a tester reveal that no power is coming to the starter is there a relay somewhere tahat is malfunctioning Have you checked or replaced the main fuses ...

...to 1/2 side of coil-traced down to brain box connection and no power on that same black wire . tested the wires comming out of the stater and no power on black wire also . so im i right i

...test light and have someone kick the bike over while you see if the stater has power comming out of it the stater is on the left crank case cover you will see the wires comming out of the cover but ...

...test the stater not the starter the stater???? The stater is the stationary part of the altenator. It can fail but seldom does the rotor and the conn faill as do the brushes. If the altenator is not ...

...stater test and i will post diagram for ya too big for one post. And also try to jump start before stater test. hope this helps if you can locate the starter and it is in a safe position,get someone ...

98 CHEVROLET LUMU STATER WILL NOT ENGAGE STATER WILL NOT ENGAGE AFTER I REMOVE AND REPLACED THE ENGINE Did you have the starter tested? If not do that first.

no spark 1995 zrt 800 need to test stater use 12 volt test light, this will tell you if the stater is putting out anything

start 2 pulls.ran good.shut it off,try to restart,no spark.how do i test stater use a 12 volt tester and see if you have voltage coming from stater, if you do, problem will be in cdi, or ignition coil

...to engine and body to engine. DO SEE if ignition wire on starter sollonoid has power when key in start position, if all fails remove stater and test directly also check battery power wire to ...

...test lamp you got to remove the thin wire on the stater motor solenoid with the tester hook to the thin wire ask some on the stater the car and see if you get any power through the tester if yes the ...