...thermal cutout on or near the magnetron or on top of the cavity / body of the oven. This last issue is what I suspect in your case. If you or a friend decide to look into it, we have critical safety ...
...thermal cutout will trip and does not reset locate the thermal cutout, a small device that looks like this or this screwed to the exhaust duct or fan housing. not resettable, test with ohmmmeter or ...
thermal cutout. As well as the electric line fuses in the circuit there are devices that look like this or this screwed to the exhaust air duct with wires to the terminals , inside the dryer. If there
...thermal fuse, overtemp cutout and probably half a dozen other names) These are a small screw on device on the exhaust duct, when exhaust air reaches too high a temperature, like a blockage, they fail ...
...off it works fine normally closed on any thermal cutout this is to make the circuit to operate the dryer till it overheats,then the thermal opens to shut off current to the heating element for ...
Thermal overload cutout tripped or is defective and needs replaced. Look for a red reset button near the heater element on the thermal overload. If no reset button, replace the thermal overload cutout
Usually answered in minutes!
44 Questions
5 Questions
3 Questions