Questions & Answers for: thermal cutout Microwave Ovens

Question about Advantium 120 Convection/Microwave Oven

2 Answers

thermal cutout / thermostat, or cavity thermal cutout / thermostat went bad. These should be tested before replacing them to be sure whether they're bad. If they read open, they're bad. Please give us

Ad

Question about JE1460 Microwave Oven

1 Answer

...thermal cutout on or near the magnetron, or possibly the one on top of the cavity / body of the oven. Once the thermal cutout is replaced and it's alive again, you may then find the magnetron is bad, ...

Ad

Question about FMV145K Microwave Oven

1 Answer

...thermal Cutout Question Hi, my OTR CFMV145 went completely dead, no lights, fan...nothing. The fuse, which I've replaced before is good, so I'm thinking its a thermal cutout (the fan vents were kind ...

Question about MV-1515 Microwave Oven

1 Answer

...thermal cutout / thermostat (depending on which it has) or the oven cavity thermal fuse / thermal cutout / thermostat (depending on which it has). To access some components, namely the oven cavity ...

Question about NNT995SF Stainless steel 1250 Watts Microwave Oven

1 Answer

...thermal cutout -door interlock switch or monitor switch -thermal cutout -fan jammed or faulty -diode -circuit board, triac or magnetron let me lnow if you want any further instructions... ~chuck : ...

Question about NNT995SF Stainless steel 1250 Watts Microwave Oven

1 Answer

...thermal cutout or oven cavity thermal cutout. There should be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when ...

Question about NNT995SF Stainless steel 1250 Watts Microwave Oven

1 Answer

...thermal cutout which is located on the top of the oven. You must first unplug the oven, then take off the housing (which means taking out all the screws around the perimeter). The thermal cutout has ...

Question about PLMV169DC Microwave Oven

1 Answer

...thermal cutout (not to be confused with the hood thermal cutout), or a problem on the control circuit board, the latter of which we repair nationwide for $39.95 in most cases. Details are here. We ...

...low of a temperature. Or, the magnetron might be running too hot causing it's thermal cutout to open. If equipped with a thermistor on the magnetron instead of a cutout, it may have drifted in

...caused the thermal cutout to open, then came back to life after the magnetron cooled, and the thermal cutout closed its contacts. If that is what happened, then the magnetron probably

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...