E6 error on CS-100, thread underneath all knotted and tangled, makes grinding sounds. Your bobbin is not wound correctly. Check and see if your bobbin thread is wound to loose or unbalanced.
Question about CS-100-T Computerized Sewing Machine
sewing Hardly ever used this machine. I bought it at costco few years back and have tried to use it only a few times but I always get frustrated because it has never seemed to work right. It will work
Question about CS-100-T Computerized Sewing Machine
...thread getting caught in bobbin are on Brother Cs-100 Help me please.... my needle thread is getting stuck on some spring on the outer part of the bobbin case. I cannot find whether this spring is in ...
Question about CS-100-T Computerized Sewing Machine
...thread tension on my Brother CS-100. The bottom stitches look just fine but the top ones are like one straight thread with little loops coming up from the underside. The stitches are terribly loose ...
...Sewing Machine one side is fine the other side is gathering..how do I fix the tension if its the bottom gathering loosen the top tension and vice versa( make sure its threaded right first bottom ...
Question about CS-100-T Computerized Sewing Machine
...sewing machine keeps getting stuck on the bobbin case. I think it may need to be retimed but do not know how to do this. before you do that, make sure that the machine is threaded correctly. often ...
Question about CS-100-T Computerized Sewing Machine
thread a Brother cs-100 sewing machine How do I thread a Brother cs-100 sewing machine Please follow the link below, for the manual http://welcome.solutions.brother.com/BSC/public/files/dlf/doch000207
...Brother E-4 error on brother CS-100 Error E-4: The reverse/reinforcement stich button, needle position button or thread cutter button was pressed while the bobbin winder shaft is moved to the ...
...the machine and getting it to sew. Please help me. Thank you! Here is a threading guide I found for you. ...
...sewing machine keeps un-threading. I have checked the bobbin and took the thread all the way out and re-threaded it. What else can I do? Make sure you are using the right needle for the application. ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions