Bobbin threading instructions needed Place the bobbin in the bobbin case making sure the thread feeds clockwise. Draw the thread through the slot on the case. Continue to draw under the tension spring
Question about 15516 Mechanical Sewing Machine
instructions for theading a Sears Kenmore Sewing machine model 158.14000 Help need instructions for theading a Sears Kenmore Sewing machine model 158.14000. And also how to thread to wind a bobbin for
Kenmore 15516 bobbin I need help please to thred the bobbin. Thanks! no instructions! 1. Remove the bobbin case 2. Release the clutch by pulling out the handwheel 3. Draw the thread from the spool ...
Question about 15516 Mechanical Sewing Machine
...threading. Hold onto the thread end, lower and raise the needle to pull up the bobbin thread, Take both thread ends under the presser foot and to the back of the machine. Place a double layer of ...
thread on bobbin looping the bobbin is threaded properly the way the manual says but the problem is that when i go to sew the thread loops around the bobbin and its not tightening to sew Sounds like ...
Bobbin thread is breaking and thread is knotting up on the underside check the bobbin case tension--turn the screw to the left to tighten ---turn the screw to the right to loosen also check the needle
Question about 756A-30BH Mechanical Sewing Machine
I have a kenmore model # 1581212180. My top thread is looping and when I change the tension then I get where the thread doesn't even stay in the material. I don't have a manual any longer. Sounds to ...
Question about 756A-30BH Mechanical Sewing Machine
#15718: Needle thread will not catch & pull up bobbin thread. Worked great until today! Have used this machine for years. It is threaded correctly, bobbin inserted correctly. Needle goes down into ...
Question about 756A-30BH Mechanical Sewing Machine
How to thread a bobbin,sears Kenmore model 158.17031 Place both the bobbin case and the bobbin on the table in front of you. Have the open side of the bobbin case facing up and the bobbin with the ...
Question about 756A-30BH Mechanical Sewing Machine
I have a Kenmore 385 19153 the thread is breaking any keeps jamming in the bobbin Could be threaded incorrectly. Remove the thread from the machine. Put in a brand new needle.. ALWAYS RAISE the ...
Usually answered in minutes!
126 Questions
125 Questions
111 Questions
69 Questions