Question about SE3 Computerized Sewing Machine
...threading properly through the bobbin tension spring. 3) Completely remove your spool of thread, and slowly rethread your machine ensuring that you don't miss any guides, and that your thread isn't ...
Question about Sew Precious SWSP2 Mechanical Sewing Machine
How to properly thread the bobbin I have the Simplicity Sew Precious but my daughter messed up the manual so I can't follow it. I'd love to find another manual that I can print and see the pictures. ...
Question about Sew Precious SWSP2 Mechanical Sewing Machine
...threading.) Raising the bobbin thread Make sure the presser foot lever is raised.Hold the end of the needle thread with your left hand. Turn the hand wheel toward you with your right hand until the ...
Question about SE3 Computerized Sewing Machine
Fabric stuck in hole where bobbin is underneath am in middle of embroidering and the fabric is stuck in the hole where the bobbin is. How do I get the fabric unstuck? Thank you Turn off the machine ...
Question about SE3 Computerized Sewing Machine
I have a Simplicity Embrodery Machine, and the needle keeps breaking. I have checked the bobbin, changed the bobbin, changed the thread, changed the pattern. It sews for about 5 seconds and then ...
Question about SE3 Computerized Sewing Machine
My Simplicity Americana Series SE3 has quit hooking the bobbin thread and it will not embroider. I had a series of jams and got them clear, re-threaded the machine and tried new bobbins. Is there ...
...bobbin, threading from the inside to the outside put the the bobbin spindle 3.push the bobbin winder spindle to the right (if you have a electronic machine the LED display will show SP) 4.depress the ...
Question about SE3 Computerized Sewing Machine
I have singer 6212 that will not pick up the bobbin thread, also I was trying to adjust the needle ans can't seem to get it back to the right position to keep it from breaking the needle. Does an ...
Question about SE3 Computerized Sewing Machine
why does bobbin knot up? Was working fine until changed thread & boggin try changing the needle--make sure the needle is the correct one for the thread and fabric being sewed make sure the top thread ...
my bobbin wont pick up on me simplicity se3 Make sure the needle is not bent and fully inserted into the holder. Replace needle if in doubt. Be sure the bobbin is properly loaded onto case. Only use ...
Usually answered in minutes!
76 Questions
45 Questions
40 Questions