Question about 30 Cubic Centimeter Curved Shaft Gas Trimmer
...throttle cable is free and not binding any where and to be sure of its adjustment to allow the throttle to return to the idle position. lubricate the cable from the trigger to carb. wd 40 is ok. if ...
Question about 30 Cubic Centimeter Curved Shaft Gas Trimmer
...wire is moving freely and check the throttle shaft in the carburetor to make sure it is moving freely. If both are free, then check to see if something is pinching or binding on the throttle
Question about 30 Cubic Centimeter Curved Shaft Gas Trimmer
...throttle cable on a C430 String Trimmer? When I depress the throttle cable, the linkage on the carburetor only moves about 1/16 inch and will barely turn the cutting head. The throttle cables aren't ...
Question about 30 Cubic Centimeter Curved Shaft Gas Trimmer
...throttle cable can easily be replaced onto the throttle lever of the carburetor...if the end of it has not broken off. The end is dog-legged and quite thicker than the main cable. If you put it back ...
Question about 30 Cubic Centimeter Curved Shaft Gas Trimmer
throttle cable where it exits the plastic engine housing and goes to the throttle plate on the carburetor. Make sure it is connected correctly and not binding on anything on the way to the carburetor.
Question about 150 mph 400 CFM Gas Blower Vac RY09053
throttle cable doesn't give full throttle adjust the screw of the outer cable locator could be at the throttle trigger or at the carby
Question about 150 mph 400 CFM Gas Blower Vac RY09053
...Check the throttle cable connection at the carburetor throttle linkage, it (cable) may be broken or the carburetor linkage is broke. the cable possible damaged and or disconnected at the ...
Question about 150 mph 400 CFM Gas Blower Vac RY09053
...throttle cable on a 46cc Ryobi chainsaw I see how it works but I just can't get the darn thing to stay in the attach point on the carb. Does anyone have a picture of the cable installed Here's a ...
Question about 150 mph 400 CFM Gas Blower Vac RY09053
What is the part number for ryobi leaf blower ry09055B Throttle cable? Throttle Cable Part Number:270031002 270031002 Throttle Cable
Question about 150 mph 400 CFM Gas Blower Vac RY09053
...Throttle Cable Replacement I have since learnt that you must buy the entire Throttle arm with cable assembly. My only problem is The UK or Germany don't have it in stock. Can anyone help.??? Hi, ...
Usually answered in minutes!
295 Questions
300 Questions
122 Questions
96 Questions
40 Questions