Questions & Answers for: Canon thumb screw

...printers this way, saving costly repairs. Hope this helps. Bud took my mp530 apart to try to remove a thumb tack now I can't get it back together and it now has a screw plus the thumb tack please ...

...thumb screw in the top left rear side cover. Then to reset fixing error codes like E-000 Press additional functions key press # key press + key until the display reads #7 press set press + key until ...

...thumb screw or a Phillips #2 screw, just remove the screw and pull the unit out, it's about a foot long. There is a plastic door on the drum unit, pull this plastic door off and dump out the waste ...

Cant open the battery door on my canon sd1200is There are two ways to open: 1) instead of using the thumb to slide, use your nail to put in the clevis to push side to open 2) or unscrew 6 screws to ...

...the developer unit unscrew the thumb screw (or screw) and pull drum out toward you. unwrap new drum and install in reverse there are service mode adjustments but most of the time not ...

...thumb screw on the front of the copier or one Black screw ( philps head) remove the screw and the drum should pull straight out toward you and install the new drum unit and lock the transport tray ...

green handle>remove thumb screw on grey cover>slide out drum unit>unpack new drum>slide back into area where old drum was removed>reinsert thumb screw>lift green handle>close door

...camera (as viewed from the back). Use a precision screwdriver to unscrew the two screws. Hook your thumb against the side of the battery and lift upward, then pull the battery out. It takes one 2CR5 ...

error 1500 It can have a lot to do with some obstruction in the print path, the gears, or ink on the clear plastic encoder strip. You're on the right track - I found the the purge cap (the white ...

...thumb-grip back slightly, there's a short screw there closest to the left side of the thumb-grip. ... Remove 3 short screws from the bottom of the rear cover. ... Step 5 D3100 Difference for Step