Questions & Answers for: Harley Davidson thumb screw

thumb screw on handle bars does anyone know what the cross head thumb screw under the right hand side of the handle bar is for please ? On the grip ? Thad be the cruise control That is the adjustment ...

...screw caps. They just press in with thumb pressure. I also have an 05 Road King Custom. You have to remove the cover where the key fits to lock the forks, then remove the headlight and remove the ...

...I just found that after screwing it in (only goes in one way) I pushed down extra firmly with my thumb and the cap moved clockwise about 1/4 inch like it needed to be locked in better, then I

where do I add the oil? Generic answer - probably through a hole you will find on th right hand side of the engine not too far from the brake pedal. It will likely have a thumb screw type handle on it

...thumb cruise control on my 2001 Road King Classic, but how does it release without backing the screw off by hand? You answered your own question. Its technically not supposed to be used as a "cruise ...

...thumb on the detent spring and ball, back out (turn counterclockwise) the rebound adjuster to the last "click." and then turn down (clockwise) 17 "clicks", thread the rebound adjuster onto the damper ...

...screw that holds the chrome retaining ring at the front of the headlite and then remove the ring. The headlite is held in place by a rubber gasket, pushing the headlite in on one side with your thumb ...

...thumb screw on the bottom of the throttle that you can turn to lock the throttle in a particular location or put a resistance on the throttle. It holds enough tension on the screw to keep it from ...

...thumb screw inside the throttle assembly. When you turn the thumb knob upwards, the copper piece presses against the bottom of the throttle sleeve. ...

screw and the the throttle grip. Personal preference dictates how one chooses to set the throttle on their bike. As for me, I am never comfortable with it until assured that upon release, the throttle