mixer head is loose beater scrapes bottom of bowl makes loud thumping noise I assume you mean that the top half of the mixer, above the pivot pin, moves with respect to the lower half of the mixer, ...
Question about Artisan Series Tilt-Head Stand Mixer
noise to top it up , have i burned the gears ? You are putting too much pressure and overloading (motor) the Mixer. Specially if you run it for long time. Grating cheese is hard on mixers. Let it rest
Question about Artisan Series Tilt-Head Stand Mixer
...head of the mixer and there is a screw just below the area where the head is attatched to the base of the mixer. turn the screw counter-clockwise about 1 turn, try the mixer and see if it still does ...
tilt-head Artisan Stand Mixer are as follows: Stir speed - 60 Speed 2 - 95 Speed 4 - 135 Speed 6 - 180 Speed 8 - 225 Speed 10 - 2 i replaced the worm gear but it still has no power and stops under any
...of 180 RPM. For your reference, the planetary RPM's for the 5-qt. tilt-head Artisan Stand Mixer are as follows: Stir speed - 60 Speed 2 - 95 Speed 4 - 135 Speed 6 - 180 Speed 8 - 225 Speed 10 - ...
Question about KSM150PS Artisan Series Stand Mixer
...of 180 RPM. For your reference, the planetary RPM's for the 5-qt. tilt-head Artisan Stand Mixer are as follows: Stir speed - 60 Speed 2 - 95 Speed 4 - 135 Speed 6 - 180 Speed 8 - 225 Speed 10 - ...
Question about Artisan Series Tilt-Head Stand Mixer
...Kitchenaid mdl: KSM 155gbca is making a loud bumping noise with or without an attachment. When we lock the mixer and then turn it on it makes a loud clicking noise. We thought it was the mixing ...
Question about Kitchen Aid K45SSWH Classic Tilt-Head Stand Mixer
...mixer is indentified as kitchenaid ultra power The mixer's planetary is not disconnected when the meat grinder is attached and continues to turn. If the noise you hear only occurs when the grinder is ...
Question about Kitchen Aid K45SSWH Classic Tilt-Head Stand Mixer
...noise? Not running at all? Christina, can you give more information of the problem? Is your mixer turning on at all now? Making clicking or grinding noises? Do you need to replace broken or dented ...
Usually answered in minutes!
493 Questions
357 Questions
324 Questions
285 Questions
205 Questions