Questions & Answers for: tools need remove blower fan

...tools need to get to it and a nut driver to remove the 2 screws to replace it. A 20$ part. my 2002 heater fan switch resister keep goning out dodge carvan im trying to locate the heater fan on a 2002 ...

...blower motor would be the first choice to check. Locate the fuse box and check the fuses. Next either ohm out the resitance of the motor or remove it and test it, most parts houses will test a part ...

...I find this blower motor resistor thank you The blower motor resistor will be on the Fan mounting backplate,,it will usualy be mounted in such a way as to be in the airflow when the fan is

blower and have the step by step instruction to do the job with simple tools. The price will be better then the dealer and it's better to change it now then the winter. Good luck and hope this helps.&

...It has a fan motor relay that is usally located next to the blower motor itself its the cheapest fix and if not that the blower motor itself which is located under the dash on the passenger

...blower all of a sudden just stopped. can you tell me what it could be? Check for a blown heater motor supply fuse, Check operation of heater motor control relay, Check operation of fan speed control ...

...blowing fuses. Sounds like you need to replace the blower motor,or you're a/c is running during the heat cycle,unplug the compressor to verify. you wires might be shorting out, which would blow ...

...a short circuit either in the wiring or the blower motor you need to check the wiring to see if you can see any faults if not the blower motor may have to be replaced......hope this

dropped a small tool down the dash air vent. it is blocking control oh temperature knobb You are going to have to remove the blower assy to extract the tool

...flows from the 25 amp fuse, in cavity 7 of the fuse block, to the blower motor. Blower motor speed is controlled by the fan control switch located in the instrument panel, and by the resistor