...cam bearing can you help hi the cylinderhead torque settings are STAGE 1, 30Nm (22l bf ft) STAGE 2, 50Nm ( 337 lb ft ), STAGE 3, angle tighten another 90 degrees, STAGE 4 angle tighten another 90 ...
...torque on the cam bolts Rock the caps around to make sure the bearing locating clips are lined up. Torque the bearing caps to 12 foot-pounds. At this point you must check the valve clearances again. ...
...torque tightening specs are for a 1993 SEAT IBIZA . Thank you CAM SHAFT BEARING CAPS 15 FT LBS. DRIVE SPROCKET BOLT 58 FT LBS. CAMSHAFT END PLAY IS 0.006 in. WARNING THIS IS THE 2.8L ENGINE WHEN ...
...cam torque specs need cam cradle torque specs 01 daewoo nubira 1999 to 2002 - 2.0L DOHC Camshaft bearing cap bolts intake and exhaust. N.m (INCH LBS) 8 ( 71 ) i want to buy surplus engine 94 daewoo ...
cam and torque the bolt to 85 ft. lbs. (115 Nm). Brake line to the wheel cylinder. Torque the brake line bracket bolt to 15 ft. lbs. (20 Nm) and the brake line fastener to 11 ft. lbs. (15 Nm). Parking
i need camshaft bearing cap torque setting; 1999 100series 1fze engine thanks Camshaft Bearing Cap Bolt 124 ft.lb. of torque Maybe for a Main bearing Cap, Certainly not for a Cam bearing
...torque, the cam timing gear have lb.-feet of torque, and the cam bearing bolt has 14 lb.-feet of torque.Crankshaft Torque SpecsThe stock rod bolts have 46 lb.-feet of torque and the ARP rod ...
Question about 2005 Suzuki XL7 - Without speaker - Carpet Dash Cover
...Torque Suzuki XL7 2.7 2003 - Suzuki 2002 XL-7 ...What are the torque specs for cam caps on a 2005 Suzuki forenza 2.0 ... Need torque specs for 1.3 liter motor,connecting rod bearing and main
Question about 2005 Suzuki XL7 - Without speaker - Carpet Dash Cover
...cam shafts torque specs for 2013 1.3 toyota corolla 1nr engine (1) Apply a light coat of engine oil to the threads and under the heads of the cylinder head set bolts. (2) Using several steps, ...
Question about 2005 Suzuki XL7 - Without speaker - Carpet Dash Cover
...toyota corolla 1nz and i need torque setting for main bearing, big end , cylinder head and camshaft bearing This manual has everything but cam torque ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions