Questions & Answers for: Toyota Sienna torque converter switch

...I sure hope that gets you fixed up. One thing to check before you spring for new rotors - with a torque wrench, set to the proper setting as prescribed by Toyota, loosen and then retorque all your ...

...torque converter . Have the dealer fix it ,and have it on paper with dealer invoice when it is done. Do all this before warranty expires. IT IS NOT USUAL for any car, Toyota included, to have tranny ...

need to know the head bolts torch specs on 98 toyota v6 heres the torque specs and the way to tighten the head bolts for your 1998 toyota sienna, hope this helps, 12 point bolts step 1- 40 ft lbs step

...Torque Converter Switch stuck off I have a 2006 sienna van 2 wheel drive. I clear the code with my scanner and the light comes back on the dash. What is the problem with the torque converter If it is ...

...of the old stays in the torque converter--since its so dirty u cud doit again until it clears--do not flush it with a machine-it will disable it cause dirt will get into the valve body and become ...

...reason that this is important is this method changes cooling lines, cooler, torque converter in addition to the rest of the trans. Some transmissions also need to have the filter changed at this

What is the torque for oil plug for 2010 Toyota Venza? Oil Drain Torque Specs Toyota Nation Forum Toyota Car and Truck Forums The blog above lists 27 - 30 ft. lbs. torque for the drain plug. As ...

What are the torque specs on a 2002 toyota sienna's spark plugs, air intake manifold, and valve covers? Thank you. Need torque specs for 2002 sienna ce van's; spark plugs, air intake manifold (upper),

WHEEL torque specs LUG NUT TORQUE That should be stated in your Owners Manual. But generally (at least on cars I've owned) it is 80-90 lbs.

I need the torque spec for the cylinder valve cover 2004 toyota sienna? 20. INSTALL CYLINDER HEAD COVER SUB-ASSY (a) Apply seal packing to the cylinder head as shown in the illustration. Seal packing: