torque settings for 1985 4A corolla cylinder head I am changing the head gasket, and need the torque settings, it is a 1985 1600 toyota corolla 4A engine hey, torque must be done in 3 steps: 1st 22 ft
ft-lbs? 22 foot pounds plus 90 degree. what is the torque specs on 4afe 1.6 toyota corolla connecting rod & cylinder head verify, but I believe it's about 35 ' lbs 7 is too light. Good Luck -Ned-
...TORQUE SETTINGS FOR THE CYLINDER HEAD? PLEASE PLEASE HELP cylinder head bolts: step one: 22 Ft-lbs. step two: tighten additional 90 degrees step three: tighten additional 90 degrees I need the torque ...
...torque specification for cylinder head 5AFE L touring. Apply a light coat of engine oil on the threads and under the heads of the cylinder head bolts. - Install the plate washer to each cylinder ...
Question about 1990 Corolla
...for head cylinder on 1994 toyota camry 220se Torque the cylinder head bolts in three stages as described below: 1st stage = 25 NM. 2nd stage = 49 NM. 3rd stage = Rotate each bolt further 90
Question about 1993 Corolla
...cylinder head torque please ? torque setting for the cylinder head please Hi Manuel, There are a number of different engines used in the Corolla, knowing which would be a great help. The engines used ...
...Cylinder Head Torque: (a) Apply a light coat of engine oil on the threads and under the heads of the cylinder head bolts. (b) Install the plate washer to each cylinder head bolt. (c) Install and ...
Hi 1993 toyota corolla dx 1.8 cylinder head torque sequece There are some images of the head tightening sequence on the link below: toyota corolla head bolt sequence Google Search
Question about 2003 Corolla
...torque setting, main bearing, big end , cylinder head and camshaft bearing im rebuilding a toyota corolla 1nz and i need torque setting for main bearing, big end , cylinder head and camshaft bearing ...
Question about 1990 Corolla
...1.6 cylinder head bolt tightening sequence and torque specs please? All in this link https://www.google.com/search?q=1990+Toyota+Corolla+1.64+cylinder+head+bolt+tightening+sequence+and+torque+specs
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions