...torque settings i have a hyundai elantragls j2 motor please could you assist me with the torque settings all of them please. thats big end and main bearings, head bolts and cam shaft it is a twin cam ...
...torque settings for 1997 I need the cylinder head (and associated parts) torque settings for 1997 1.8L hyundai lantra 1998 Hyundai Lantra "G4GM" engine 1795cc.there are two heads or blocks, one is ...
...torque settings of the j2 1.8GLS 1996 hyundai elantra cylinder head bolt torque 10 mm bolts step 1 22 ft lbs step 2 additional 60 degrees step 3 additional 60 degrees 12 mm bolts step 1 26 ft lbs. ...
torque settings for a hyundai accent 1500 1998 model torque settings for head , conrods and crank cylinder head bolt torque 52-55 ft lbs. cold engine 59-63 ft lbs. hot engine connecting rod cap nut 26
big ends torque settings head torque settings 10 mm bolts step 1 22 ft lbs. step 2 60 degrees step 3 additional 60 degrees 12 mm bolts step 1 26 ft lbs step 2 60 degrees step 3 additional 60 degrees
Question about 2005 Matrix 1.6
...torque settings for the head bolts for a Hyundai Matrix 1.6 Hi, Acording to autodata the following applies. hyundia matrix 1.6 01-09 engine g4ed stage 1 +30nm stage 2 +90 degrees stage 3 slacken 360 ...
Question about 2005 Matrix 1.6
torque settings anywhere. clutch/flywheel torque settings - Hyundai Forums : Hyundai Forum www.hyundai-forums.com/...accent/146383-clutch-flywheel-torque-setti... Aug 2, 2012 - 3 posts - ?2 authors Im
Question about 2005 Matrix 1.6
...torque settings for a hyundai get 1.3 - cylinder head you do not need to renew bolts but good practice to do so. stage 1. 23-27 nm stage 2 plus 60-62 degrees stage 3 60-62 degrees use angle gauge on ...
Question about 2005 Matrix 1.6
torque settings Tighten the cylinder head bolts in the sequence shown. Using the 4 step torque turn method, tighten according to the following values: Step 1: All to 34 Nm (25 ft. lbs.) Step 2: All to
torque of 65 lb-ft (88 Nm) It's important to tighten the bolts in the correct sequence. The sequence is as follows: 10 6 2 3 7 9 5 1 4 8 Note: The numbers above refer to the cylinder head bolts in the
Usually answered in minutes!
1,503 Questions
1,180 Questions
1,131 Questions
1,254 Questions
1,082 Questions