Question about A,b,g Tractor Carburetor Float Dltx10
how is crankshaft end float controlled and when refitting flywheel does it go hard in, thanks By the thickness of the base gasket. No just set it on and tighten nut/bolt to correct torque. Sam
Question about 420,1020,2010,2020,2510,2520 Tractor Float
torque spec on a 425 john deere head Initial torque-115 inch pounds,final torque-186 inch pounds.Intake manifold is 53 inch pounds on all 8 screws.Valves set at 0.010 on all 4.If you go with the new ...
Question about Muffler 1010 Diesel Tractors
does torque increase with increase in backpressure does torque increase with increase in engine backpressure at low rpms? No ..rateded at RPMs and torque curves related fuel delivery and eng ...
Question about Muffler 1010 Diesel Tractors
...2 is upper right Bolt 3 bottom left Bolt 4 upper left Bolt 5 lower right. Torque them in the sequence above... to 15 Ft lbs. or 180 inch lbs reset your torque wrench and then torque them to 30 Ft lbs ...
Question about 2010 Tractor Basic Carburetor Repair Kit
...torque settings for a cylinder head of a john deere 2140 turbo and the torque settings for shell bearings of a 2140 turbo Here's the link and I'm sure you will get the solution of your problem - Best ...
torque settings engine http://fcmason.thomasnet.com/item/it-manuals2/it-man-jd/jd37
Question about Tractor 1020, 1520, 1530, ITJD37
Connecting Rod & Main Bolts torque specs on a G series John Deere 2 Cylinder Head nuts 208 ft. lbs Rod bolts 75 ft. lbs
...2 Blade Bolt Torque (81 N·m (60 lb-ft.) Cutting Heights (25-114 mm (1-41/2 in.) Weight (86.7 Kg (191 lb) Overall Width (chute up) (927 mm (36.5 in.) Mower Deck (48-inch) Blades (3 Blade Bolt Torque ...
Question about Tractor 1020, 1520, 1530, ITJD37
Need bold torque settings for JOHN DEERE 6.8L engine Tried of trying. Please help Here's a chart - http://reliancepowerparts.com/catalog/documents/tech-tips/torque.../tr-jd-6068-PT-TSI.pdf
Question about Yanmar Tractor Clutch Set 650 750
Yanmar TF90-M Industrial Diesel Engine head bolt torque specs. Are they in ft/lb or Newton Metres and what would they be please? Cheers Question edited for clarity. Question moved from Cars and Trucks
Usually answered in minutes!
1,057 Questions
111 Questions
134 Questions
104 Questions
149 Questions