renault laguna 2 rear hub turqe settings reg 51 rear hub turque settings to replace dics hi - THE REAR HUB TORQUE SETTING IS 280 NM OR 207 IBF FT. HOPE THIS HELPS good luck kas
Torque settings head bolts 1998 Renault Megane 1.6 RT angle torque settings of cylinder head bolts, alot of confusing information at the moment, the settings need to be bang on or the head is history.
torque setting for front driveshaft nut what is the torque setting for the front driveshaft nut on a renault clio 2?
torque settings wanted for cylinder head bolts engine type d7f D7F ENGINE Preseating the gasket Tighten all the bolts to 2 daN.m, then angle tighten to 90° Wait 3 minutes settling time. ...
...for cylinder head tightening torque specifications? Stage 1: 25nm Stage 2: 25nm Stage 3: 90 deg Stage 4: 90 deg Stage 5: 90 deg +- 10deg Yes that is correct- a total of 270 degrees! Hope this
Question about 2004 Megane
...Torque setting's for Renault clio 1.2 16v 75hp 2005 and are the bolts strech bolts Cylinder head: Renew bolts Yes 1.Tighten20±2 Nm 2.Tighten20±2 Nm 3.Individuallyslacken off360° 4.Tighten20±2 ...
...torque settings for this vehicle, is it 47 degrees + 5 degrees, or is it 47nm + 5 degrees. Please help me out. Thanks From my research, everything for Renault is torque in Newton Metres (Nm) plus ...
...torque settings. Renault Clio 3 Sport. 2.0 Check the length of the bolts (118.5mm max) stage 1- 20 Nm, stage 2- 20Nm, stage 3- 100deg +-6deg, stage 4- 100deg +-6deg and for the cam sprocket 45Nm, ...
Question about 2004 Megane
...torque settings for rocker cover on an 08 Renault master please? Looking to remove rocker cover in order to clean out the cylinder heads, so looking to find out the torque settings for ...
Usually answered in minutes!
101 Questions
111 Questions
61 Questions
77 Questions
56 Questions