...torque specs for the main and rod bolt for a 99 escort 2.0l engine engine tightening torques Main bearings Renew bolts/nuts No Main bearings Stage 1 43 Nm Main bearings Stage 2 85 Nm Big end bearings ...
Question about 1994 Pickup
...end torque specs for 2.8 diesel Hilux? 3L engine What are the big end bearing torque specs for 2.8 diesel Toyota Hilux? 3L engine Check in this manual ...
...end bearings tensions specs and cylinder heads vehiclew427vehsv This site has all the torque specs you should need make sure this is the correct engine. ...
Question about 2008 Corvette
...Torque the bolts up to 17 Nm. Stage 2. 34 Nm. Stage 3. Rotate all the bolts 90 degrees. Stage 4. Finally rotate all the bolts further 90 degrees. Main Bearings: Tighten the main bearing bolts in two ...
Question about 2007 Yaris
...Big end Torque settings: Tighten the main and big end bolts in sequential order and in two steps. Main bearings. Stage 1. 22 ft lbs. Stage 2. 44 ft lbs Big end bearings. Stage 1. 11 ft lbs. Then ...
Question about 2007 Yaris
PLEASE I NEED THE TORQUE VALUES FOR TOYOTA PRADO WITH 1KZ TE ENGINE ie.CYLINDER HEAD,big end bearings etc. try here Toyota Workshop Manuals
Question about 2007 Yaris
torque settings for a toyota hilux 2006, 1kd engine for cylinder head, big ends and main bearings a fly wheel bolts I got this free Pdf manual from reliable-store for free and I don't think Ive ...
Question about 2007 Yaris
...big ends, mains and a fly wheel torque settings for a 1kd 2006 engine for cylinder head, crank shaft and a fly wheel you found the right place right time buddy.. i know a lot of websites for repairs ...
......
...torque specs 1kd crankshaft torque specs Engine code Torque output From 300 N·m (30.6 kg·m, 221.1 ft·lb) at 2,400 rpm to 420 N·m (42.8 kg·m, 309.5 ft·lb) at 4,000 rpm Firing order Dimensions (L x H x ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions