...strut torque nut to 35-46 ft lbs. stabilizer bar link torque to 60- 81 inch pounds.stabilizer bar bracket torque to 25-33 ft lbs.NOW INSTALL .brake hose / brake load sensor/ rear wheel /rear package ...
...install: Install or connect the following: Strut to the chassis. Torque the nuts/bolts to 33 ft. lbs. (45 Nm). Strut to the lower control arm. Torque the nut/bolt to 144 ft. lbs. (195 Nm). Front ...
torque strut, which is mounted underneath on the passenger side is what controls the front to back movement of the engine. The engine will shift slightly with a healthy torque strut, but shouldn't
Question about 2003 XL 1200 C Sportster Custom
...to the arm to 10 ft lbs. then install the support arm/turn signal assembly to the fender strut and torque bolt to 15 ft lbs. then replace fender strut and torque those bolts to 15 ft lbs. Good
...impalla torque strut I need to know the torque specs for the 2 torque struts I am going to replace. This is for front suspension, 06 impala, 3.5L engine. It's a little small, maybe you can read
Question about 2002 Honda Odyssey Front Strut Boot & Bumper Pair
what are the torque specs for the front struts on a 2002 honda odyssey. i need the torque specs for the top 3 nuts of the front struts as well as the bottom 2 bolts on a 2002 honda odyssey. I normally
Question about 2002 Honda Odyssey Front Strut Boot & Bumper Pair
torque specs for struts dodge intrepid replacing strut. need torque specs Call the auto parts place that you purchased the struts from.
Question about 2002 Honda Odyssey Front Strut Boot & Bumper Pair
...Torque lower strut bolt to knuckle to 129 ft. lbs. c. Torque lower ball joint to knuckle to 148 ft. lbs. d. Torque wheel speed sensor to knuckle to 133 in. lbs. e. Torque stabilizer bar upper link to ...
Question about 2003 Bonneville
...Strut mount nut torque specs please? Question edited for clarity, MAKER. Question moved to model category. Torque spec question : 2000-2005 (other than GXP) http://www.pontiacbonnevilleclub.com > ...
strut and torque the bolts to 59 ft. lbs. (80 Nm) Fork to the lower arm and torque the bolt to 88 ft. lbs. (120 Nm) Upper strut mounting nuts and torque to 36 ft. lbs. (50 Nm) Brake hose bracket Front
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions