Question about 65HM167 65" Projection Television
toshiba 65hm167 black screen with video input toshiba 65hm167 black screen with video input can see menus, led light is solid blue, without video input can see "no video signal" this means it can't be
Question about 65HM167 65" Projection Television
I have a Toshiba 65HM167, heard a loud pop then no picture, still sound but no picture. What would this be? your lamp blew out
Question about 65HM167 65" Projection Television
...toshiba 65hm167 no red color on the screen I have a toshiba 65hm167 the other day all the red went out and now there is only blue and yellow color. I chanced the bulb only to find out that there is ...
Question about 65HM167 65" Projection Television
have a toshiba 65hm167 and i heard a loud pop. The tv stayed on as i could still hear but lpst the picture. Replace the lamp would be first thing to do.
white spots on a toshiba 65hm167 Remove and send light engine out to be rebuilt. i don't believe they are available ant more. try PTS or Toshiba for est.
Question about 65HM167 65" Projection Television
Toshiba 65HM167 65 in. Television Pop off the front panel below the tv screen. Remove bulb cover door (screw) and then remove the bulb housing. Replace with new bulb and reverse the process. Thank you
Question about 65HM167 65" Projection Television
TOSHIBA MODEL 65HM167/OPTICAL BLOCK. MY PICTURE TUBE BLEW AND I REPLACED IT, BUT I STILL DONT HAVE A PICTURE ITS STILL BLACK, AND THE TV MAKES A HUMMING NOISE. CAN I JUST REPLACE THE BALLAST PART ...
Question about 65HM167 65" Projection Television
Toshiba 65HM167) is correct the dots are a damaged Optical light engine.These early units were DLP but had a 1/4 of a million micro mirrors in the optical unit--if they do not open and close correctly
...toshiba 65hm167 turns off and on It started with the white dots all over the screen and now when I turn it on it will shut off and on over and over again. May want to retire this set---the white dots ...
no red on my toshiba 65hm167 tv cannot change the color not good, check all inputs etc, the model is a Dlp set so if loss of one color etc a Bad Optical Light engine is likely.
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions