Questions & Answers for: touch lamp

Touch lamp repair I have a touch lamp that had a blown bulb, replaced the bulb and the lamp will still not light either by switch or touch. There is no identifying information on the lamp other than ...

touch the glass portion of the lamp with your fingers, the oil from your skin will shorten the life of the lamp, when installing new lamp push into tunnel just far enough that it touches end of tunnel

touch lamp and three of the glass planels are broken do you kow whenere I can get replacements Hello there: here is several links that will definatly help you in your quest to find touch lamp glass ok

...touch the lamp receptacle once the lamp has been removed. 3. Take the new lamp out of the box. Do not touch the glass portion of the new lamp. ✍ Do not shake the lamp. Vibration can damage ...

touch feature on a table lamp has stopped working; is it fixable? maybe you need to find a contact wire to the metal housing on the lamp. THis may be around were you insert the bulb but not sure. make

...inside filter should also be replaced. 4:Insert the new lamp into the projector carefully avoiding touching the glass of the lamp itself. Touching the lamp will deposit skin oil that will likely ...

...inside filter should also be replaced. 4:Insert the new lamp into the projector carefully avoiding touching the glass of the lamp itself. Touching the lamp will deposit skin oil that will likely ...

...inside filter should also be replaced. 4:Insert the new lamp into the projector carefully avoiding touching the glass of the lamp itself. Touching the lamp will deposit skin oil that will likely ...

...change the bulb on the deco dome touch lamp? deco dome touvh lamp Looking at the picture supplied, it looks like you unscrew the top silver dome nut. Please make sure it's unplugged when

RCA M50wh72s keep blowing lamp do not touch the lamp during install and if somehow it did touch your skin, you have to cleanit with oilf free napkin and alcohol