Questions & Answers for: tow haul fuse

tow/haul does not work on 2000 chevy truck. whereis fuse? Looking for fuse for tow/haul button on 2000 chevy truck I had a problem with my tow/haul button not working. I came to find out that the gear

tow haul light on sierra 2002 wont come on tow haul light wont come on where is the fuse thanks lois I'v heard that the tilt wheel causes the wire to break. Most likely the wire has been broken. ...

...tow haul wont work, light wont come on at all check all your fuses. If your lucky you might find one the is blown and could be related If not fuse related then you need to remove the platic steering ...

...tow haul mode won't engage. no blown fuses.How do I check shift lever switch check your wires at the connection that goes to the tow haul button. under the plastic cover where the shifter connects. i ...

...tow haul started blinking check your trans fluide oil for a burnt smell if so replace ---mercon sp only in power shift trans anything else will cause damaged tow haul light fashing = trasmission code ...

tow/haul not working on gmc yukon 2001 When i press the tow/haul button on the control lever nothing happens. Can it be some kind of a fuse? Help! The wires are probably broken. They follow the ...

...Tow Haul switch Need to know if there is a fuse for the tow haul switch, and where it is on my 99 chevy truck No, the switch is powered from the transmission, and if the had no power, you would not ...

MY 2000 YUKON XL ONLY HAS ONE WORKING CIG LIGHTER AND THE TOW HAUL IS STUCK ON ONLY ONE CIGARETTE OUTLET WORKS AND THE TOW HAUL IS STUCK ON Check fuses for cig lighter, and replace a switch for towing

Tow/Haul mode enables the operator to achieve enhanced shift performance when towing or hauling a load. When tow/haul mode is selected, the tow/haul switch input signal to the body control module (BCM

...tow haul light works but does not level or rise the rear when connected to trailer. limited info generic answer ---tow--haul switch doesnt have auto level thats a separate system --have scanned for ...