Questions & Answers for: Stanley trigger is stuck

Question about Stanley Tools & Hardware - Others

1 Answer

...trigger assembly first. Let me know what you find that I have suggested and I will try and come up with more but this should help as long as you bought the right valve assembly, and lastly make sure ...

Ad

Question about Bostitch N80s Nailer -rebuild Parts O`ring & Seal Kit

1 Answer

When plugging into the air line, the driver extends and will not retract. could be the trigger assembly has a stuck o ring or the firing valve is sticking, I would look at the trigger assembly first.

Ad

Question about Bostitch N80CB Coil Framing Nailer

1 Answer

...trigger after nail got hung up. got nail out pushed piston back.air still coming out and gun won't fire. you need to take off the cap,and check the head valve it may have got stuck, you need to free, ...

Question about Bostitch N80CB Coil Framing Nailer

1 Answer

trigger valve (also 3mm). Reduce air pressure to 20psi (or pressure needed as some valve will be stuck) and use glove or rag to catch valve as it pops out of gun. Use caution as you connect air to gun

trigger valve assembly and it did not help. Anyone know wht to do to fix it? It sounds like you have a stuck head valve. Disconnect the air supply and remove the 4 cap screws(1) and press down on item

Question about Bostitch Nail Gun

1 Answer

i have Bostich n66c --all seems to be in order but when i pull the trigger air vents near trigger but hammer does not fire--thanks for your time i hope you can help check to see if your driver is ...

Question about Bostitch Stick Framing Nailer F28ww

1 Answer

...stuck driver or worn trigger valve. Remove the head and pull out the driver. The driver should fit snugly in the cylinder. Replace the piston oring if the drrver drops down the cylinder under its own ...

Question about Bostitch N75c1 Coil Sheathing Siding Nailer Nail Gun

1 Answer

trigger area or within gun, the driver or headvalve is stuck. Usually easy to fix. First check the driver by removing air supply and inserting metal rod into nose of gun pushing the driver all the way

Question about Bostitch N88rh Framing Nailer Driver Piston 158582

1 Answer

stuck (will usually make a pop or click when tigger is depressed), or tigger valve has failed or safety not actually touching trigger firing pin. Easy test, remove nails, remove trigger by pushing out

Question about Bostitch N88rh Framing Nailer Driver Piston 158582

1 Answer

...trigger, unplug your corded model, and turn off the switch if the gun has one. If you're an owner of an electric model, on the other hand, you can simply remove the battery pack. Similarly, the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Stanley Tool and Hardware - Other Experts

Paul Carew

Level 3 Expert

3808 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Are you a Stanley Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...