Questions & Answers for: trigger stuck dewalt drill

stuck chuck. I opened it too far and am now unable to get it to function. Hi there. spray some oil into it and tap it lightly with a small hammer. Then hold the chuck and gently squeese the trigger in

...they are spring loaded and its possible that they have lost contact from corrosion build up. do this only if you have made sure its not the batt,trigger,or stuck between gears. simple solutions ...

cordless drill is stuck closed Find a way to secure the chuck like in a vise. Then change the rotation of the drill and hit the trigger. Make sure you have a good grip on drill..good luck

...the trigger when it is on the unscrew side. It has worked before,did something get lodged in there?is that possible? it is possible that it hs moved, or the switch is stuck in fhe forward ...

Trigger stays stuck when pressed have to tap it to loosen it up,any solution will be appreciated. REPLACE THE SWITCH OR DRILL APART AND FIND OUT WHATS CAUSING IT TO RUB ON THE HOUSING, SOMETIMES THE ...

...the normal way. Put the drill in reverse. Hold the outside ring very firmly and slowly run the drill (in reverse direction). It was stuck. After about 5 bursts on the trigger, it finally came

chuck stuck open Put the chuck in a vice, put drill in forward position, hold on, and squeeze the trigger

...The drill doesn't break down when i release the trigger...hope it makes sense,don't know how to describe it better,, The switch pretty much has to be stuck/shorted. Does it do it in reverse

...stuck bit out of my DeWalt dc 895? https://www.youtube.com/watch?v=pNDgV_6k12E Reverse and Forward Mode: Try putting the drill in reverse mode and hit the trigger, then forward mode. If that doesn't ...