Questions & Answers for: Chrysler Sebring trim panel

trim panel. They are at the front of the grille, one near the top, and the other one at the bottom. 3.Remove three large washer-headed screws surrounding the speaker. 4.Remove access cover at front of

...trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want ...

what is the name of the body part below the trunk lid on a 97 sebring? it is plastic and it broke quite easily in the cold weather. It is simply known as - Rear panel inner trim :o) Lloyd

locate the convertable top motor where is the convertable top motor located inside the trim panel between back or trunk

...trim panel. (They are at the front of the grille, one near the top, and the other one at the bottom). Remove the 3 large washer-headed screws surrounding the speaker. Fig. Fastener location for the ...

...trim panel. See: Body and Frame\Interior Moulding / Trim\Trim Panel\Service and Repair\Cowl Trim Pull back the carpet to access the front upper screw that secures the air inlet housing. Remove the ...

trim panel remover tool. remove all the screws or bolts then pry the panel loose.  get a package of new plastic pannel holders. I would check to see if the window switch is good.  YOu should

...trim panel. They are at the front of the grille, one near the top, and the other one at the bottom.Remove three large washer-headed screws surrounding the speakerRemove access cover at front of door ...

...trim panel To check slighty pry the bottom edge of your door with your fingernails if it is tight all the way to the bottom it probably is the snap fastners. Make sure to remove the door handle ...

no going up Someone will need to remove the left rear trim panel inside the car and see what is the problem. It could be the electric motor, the window regulator, or the wiring. God bless your efforts