Questions & Answers for: wrangler manual clutch

Question about 2000 Wrangler

1 Answer

...wrangler sport, today I got into it after work and I couldn't put it in gear (manual trans.), when I press in the clutch it feels like it has pressure but I can not put it in any gear, it's like it ...

Ad

Question about 2006 Wrangler

1 Answer

...wrangler x series and it wouldnt start, so i went through the manual and found a fuse for the clutch bypass and installed the fuse, now it works, how long can i go with the fuse in it, can i leave it ...

Ad

...wrangler sahara it wont shift into gear doesnt grind just wont engage when i turn the vehicle off shifts into gears fine if i leave in gear and hold clutch in thn try to start vehicle it wants to ...

...wrangler wont start, put transfer case into 4L and starts fine, its like the clutch switch is U/S Take it to the Jeep dealer . It's still under warranty. Won't cost you a penny. Good luck. Check your ...

...Wrangler. 6 Cyl Manual Having real trouble getting into gear, especially from stop. Easier on gears 3/4/5 once moving. Can it be something simple as clutch adjustment or transmission fluid level? ...

wrangler yj I have a resevoir on the drivers side firewall under the hood, is this for the clutch? i have no owners manual and feels like there is air in the clutch line. If this is it what fluid do i

...wrangler 4 cylinder manual. When in 97 Jeep wrangler 4 cylinder manual. When in neutral, between shifts, coasting or anytime there isn't a load on the drive train, even when parked some times will ...

...wrangler with a manual trans rattle in nutral I have a 2004 jeep wrangler x with a manual transmission and when in nutral and the clutch out it rattles. Is this normal? Or does it need fixing? Other ...

...Wrangler with manual transmission. It has been making noise for some time when the clutch is depressed. Today while driving, the clutch seemed to go out. The pedal went all the way to the floor and ...

...Wrangler, clutch goes to floor. Tried bleeding line but didn't work. After changing transmission and clutch in 91 Wrangler, clutch goes to floor. Tried bleeding line but didn't work. The ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...