Questions & Answers for: troubleshooting oil radiator

...overheating Check radiator for coolant (directly, not just from refill reservoir). Remove thermostat temporarily for troubleshooting. Check radiator fan operation. Check for water in oil=blown

...oil. Is it a whitish milky color? If so, your engine has a blown head gasket and that's were the coolant is going. Also, check the air intake holes on the manifold. If you see any signs of leaks, the ...

...radiator is clogged and seriously needs to be flushed. Also,pull the oil dip stick and look at the color and consistency of the oil on the dip stick. If it's a milky color, your engine has a blown ...

...oil in the system but I would start with troubleshooting the Radiator in a Tank and then see if there is air bubbles coming out of the Transmission fittings. This is going to be your first clue your ...

...oil leak issue and other problems you mentioned check the following help links:---Radiator leaking? http://repairhelpcenter.blogspot.com/2011/12/radiator-leaking.html-----------consuming more fuel? ...

...troubleshooting procedure:-----Antifreeze leaking from front of engine near Air intake? http://technoanswers.blogspot.in/2012/02/antifreeze-leaking-from-front-of-engine.html----------Antifreeze ...

...troubleshooting check the help links mentioned below: ----- Click the link below: ----- Water in engine oil? http://schematicsdiagram.blogspot.com/2011/12/water-in-engine-oil.html ----------- Oil on ...

oil cap, i would like to no the causes of this problem help please. Car overheats and Air blows hot at idle? http://howtobyme.blogspot.com/2011/11/car-overheats-and-air-blows-hot-at-idle.html --------

...radiator topped off and the cap off run the engine at idle. bubbles indicate a blown head gasket or cracked head. Also look for water in the engine oil and oil in the water. Real heavy water in the ...

...radiator core , from engine welsh plugs check heater core inside car does not leak. 2. is there adequate oil in the engine ? no put some oil in engine check dip stick put a little bit in if not at ...