Questions & Answers for: take tub apart

...to take the drum apart? Thanks Adie The tub bearing is blown out behind or underneath the spin tub. You won't see it until you pull the spin tub out of the machine. It's not a job for the lay

...apart i am trying to put a patch on the inside of the outter tub Is the tub area your sealing plastic>??If you need help in removing the tub than your going to have to purchase a tool that you will ...

tub. Can I snake out the drain lines or do I have to take apart the pump and clean it all out? you will have to take apart the pump clean out all pipes and tubes leading to it also they may be blocked

the outer tub assembly (rear half has the bearings already pressed in place). You have to take most of the washer apart to get it out. It's a several hour job and it helps A LOT if you have two people

how do I take the wash tub apart Not an very easy job, May I ask, why do you need to take the wash tub apart ?

...apart my tub drain? Hi and thank you for using fixya: Taking apart can be expensive and hard. Here is how to do it. 1-Remove your tub lining 2-remove tub 3-you will have access to the pipe I would ...

replace only the bearing). You don't want to put all this back together, only to have to take it all apart again when the inner tub starts hammering on the inner tub because the bearing went south

Tub came apart from top/rim of washer. Every time the washer walks the floor. . Looking down u see the white rim ,underneath the actual tub has come apart from it,how or what part needs replaced? ...

...and dry your clothes. ... Look around in the tub of the drier and see if there is something plastic and black that is coming apart in the tub or around the tub. Replace the part that is falling

...took it apart the spider arm on the tub was corroded and broken this holds the tub straight and it is mounted on spring for vibration. The tub was damaged but repairable and I installed a new tub ...