Questions & Answers for: Honda turbo fault

Turbo failure. This fault can be attributed to turbo wastegate calibration. No physical fault with component but incorrect setting of wastegate, causing over boost under certain conditions. This fault

...fault they do get hot. gas or diesel , turbo or not? what year? limphome. what year car? what engine,? the top Limp reason is failed sensor. ECT/MAP/MAF/TPS. or crank/cam sensors. the DTCs (all) that ...

...turbo fitted 6000 miles ago. It's been suggested I change the fuel filter and clean the egr valve. Can you help please code p0238 refers to manifold absolute pressure (MAP) sensor A TC system --high ...

...turbo 2006 model running well for 15 minutes then the warning light comes on and it slows down and starts to chug and the message F1 comes on in the window and flashes there is also a contunious beep ...

set when the fuel tank is empty or the specified fuel is not used. ( supermarket fuels etc have been known to cause this.. ) It can also be attributed to a turbo fault - if the fault is no turbo boost

...as a part u took off to gain some Hp (catalytic convertor) or clearances for speed equipment (turbo) and the stock brain box didn't like it being taken away !! code reader are so cheap nodays ...

fault code is p1236 what is wrong with the car thanks use to get it before had mapp sensor cleaned then it settled HI P1236 boost pressure above excepted Usually ends up being the turbo,variable veins

Honda f12x turbo idles high and doesnt seem to accellerate The system can be scanned for fault codes, that must be done 1st.