Questions & Answers for: GMC turn signals

Question about 1989 K1500

Turn signals don't work

turn signals don't work The tail lights and hazard flashers work. There is power to the fuse in the fuse panel. I have replaced the turn signal switch in the steering column. Older vehicles had 2 ...

Question about 2005 Canyon

1 Answer

2005 Canyon turn signal problem

2005 Canyon turn signal problem When I depress the brake, the left turn signal light on the instrument panel lights up and the right rear brake light does not work. When I turn the left turn signal on

Question about 1995 Jimmy

2 Answers

Turn signals dont work but bulbs work as flashers

turn signals dont work but bulbs work as flashers your flasher element has gone out , it is on the fuse box read the cover and it will tell you which one it is replace If I have this right - your turn

Question about 1998 Sierra

2 Answers

Tail lights work on both sides. turn signal and

turn signals work on both sides, but the drivers side flashes very fast. Sounds like you need to replace the drivers brake/tail light. check fuse to driver side turn signal lamp.check brake light bulb

Question about 2003 Yukon Denali

1 Answer

2003 Yukon XL Denali Trailer Light Problems

...turn signals. The DDM/PDM has no function or control of the mirror turn signals other that a pass through connection for the circuits. The audio chime is also activated when the turn signals are on. ...

Question about 2003 Yukon Denali

1 Answer

1997 GMC Forward Turn Signals wont work. Front

...Turn Signals wont work. Front signals will work with head lights turned on and manually operating turn signal up and down. Emergency flashers work fine.. please help.. Your flasher relay is most ...

Question about 2006 Savana Cargo

1 Answer

LOCATION OF THE TURN SIGNAL RELAY?

LOCATION OF THE TURN SIGNAL RELAY? Chevrolet Express Questions - 2011 Brake and turn fuse ... www.cargurus.com > Questions > Chevrolet > Express CarGurusJan 23, 2011 - 2011 Brake and turn fuse - Were ...

Question about 2006 Savana Cargo

1 Answer

I have a 2013 GMC Sierra 1500. Where is the signal light control module LM487 located? I have the knee bolster off but still can't locate it.

turn signals . Turn Signal/Hazard Lamps When the turn signal switch is placed in either the left or right position, a ground signal is completed from the turn signal switch to the BCM. When the hazard

Question about 2006 Savana Cargo

2 Answers

Where is the turn signal flasher on a 2010 GMC Sierra 1500 SLE

...turn signals. The door switches have no function or control of the mirror turn signals other than a pass through connection for the circuits. The audio chime is also activated when the turn signals ...

Question about 2006 Savana Cargo

1 Answer

I have a 2004 GMC Envoy (No Xl or XLT Model). And the left turn signal doesn't work for hazards or normal use.

...turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, all turn signal lamps will flash including both IPC turn indicators. The front turn signals are ...