Questions & Answers for: Hummer turn signals

Rapid turn signal When using the turn signal to turn right I have a rapid turn signal, The front light works, but the back light doesn't. Turning left all works as it should. the back light is blown. ...

right rear turn signal stays on, won't flash changed the bulb, and the fuse is ok...the light just stays on and a small glimmer like it is trying to flash ??? help please change your turn signal ...

...Really? Do I really gave to take it top a shop for this? You need to remove the front grill to get at the front turn signals (and bulbs). A lot of work for what should be much easier. hope it ...

...on my hummer problem rear brake lights an turn signals dont work where are my h3s fuse boxes located does the high mount brake light work? if so your lighting problem is in the turn signal

fusebox located on a h3 hummer trouble with brake and turn signals rear of truck not working check the owner's manual. the fuse that controls brake and turn signals are in the underhood fuse panel

install front turn signal on h3 You need to remove the front wheel hose panel to gain access to the turn signal bulbs.Hope this helps.Good luck.

turn signal right turn signal working intermittently, making fast clicking noise You should check for a couple of problems:1) Verify that the front and rear passenger turn signal light bulbs ...

...turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, a separate ground signal is sent to the BCM to activate and flash all turn signal lamps including ...

...turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, a separate ground signal is sent to the BCM to activate and flash all turn signal lamps including ...

...turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, a separate ground signal is sent to the BCM to activate and flash all turn signal lamps including ...