...turn signals !This is something your going to need to take to the dealer ! The body control module (BCM) is responsible for controlling the turn signals and hazard lamps. When the turn signal switch ...
...turn signals, they do not work when i just click the turn signal, I have to hold them in a specific way for them to come on. step by step heres what you got to do 1.disconnect battery ground cable ...
...the wheel in the dirrection you wish to turn... The turn signal deactivator in the steering column will sometimes deactivate the signals premeturely if the wheel is turned prior to signal
Question about 2001 Montana
turn signals are grounded at G101 and G102. The rear turn signals are grounded at G401. The sidemarker lamps are grounded through the corresponding front parklamp. The sideview mirror turn signals are
Question about 2001 Grand Am GT
...turn signals sometimes will quit working then I have to hit the hazard lights button leave it on and then turn my turn signals on then they work what causes this to happen When the turn signals quit ...
turn signals and hazard lamps. When the turn signal switch is placed in either the left turn or right turn position, the BCM receives a signal from the turn signal switch. The BCM then sends an on-off
Question about 2001 Grand Am GT
...turn signals do not on 2002 Pontiac sunfire already checked fuse and the relay in fuse box and when I put left blinker on left headlight went out Turn signal switch is probably the problem ,but ...
turn signals and hazard lamps. When the turn signal switch is placed in either the left turn or right turn position, the BCM receives a signal from the turn signal switch. The BCM then sends an on-off
Question about 2005 Grand Prix
Pontiac Grand Prix 2005 - my left turn signal on the dash board blinks faster than usual but the left signal lamp in the front of the car does not flash! It remains steady. What's wrong ? Also how ...
Question about 2008 G6
turn signals and hazard lamps. When the turn signal switch is placed in either the left turn or right turn position, the BCM receives a signal from the turn signal switch. The BCM then sends an on-off
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,435 Questions
1,496 Questions