Questions & Answers for: turn signals not working

turn signal was not working. I swapped the bulbs with the rear left-turn signal. The right turn signal's bulb worked in the left turn signal's socket, so I know it's not the bulb. Does anyone have any

...4. WHEN PUTTING ON THE HIGH BEAMS (or pulling the turn signal lever towards you) THE BRAKE LIGHTS/TURN SIGNALS WOULD WORK. (But the brake lights did not come on when the left turn signal was

...left signal lamps not working.if only one of  left turn signal dont work could have corroded bulb socket spray a little electronic cleaner in bulb sockets see if left signal

...turn signals do not work all the lights on the rear of the ford windstar do not work. Turn signals and brake lights. The headlights and the turn signals all work fine at the front of the vehicle. I ...

...vehicle was cold once it started warming up then the turn signals work but now they don't work at all is this a fuse issue or is it the whole turn signal housing that controls it? blown

turn signals. Hopefully someone can help. I checked the obvious like fuses and bulbs. LEFT TURN SIGNAL - left front signal operates properly. Left rear does not operate RIGHT TURN SIGNAL - right front

...turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. ...

...turn signals work older ford truck what could the problem all lights work except passenger side brake light I have to think the problem is inside the turn signal switch, a poor internal connection. ...

...turn signals are not working. front turn signals work rear parking lights work brake lights work In the diagram for rear lamp, the top wires are voltage, the bottom black wire is ground. The brown ...

...turn signals may have blown and needs to be replaced. Turn signal switch: The turn signal switch, located on the steering column, could be malfunctioning and needs to be replaced. Wiring issue: A ...