Questions & Answers for: turn tv speakers dynex

...turn the TV speakers off with the remote. This will not turn off the headphone output port. Press menu, go to AUDIO, then go to TV speakers. You have the option to turn the speaker OFF there. The ...

...turn off the TV speakers. When I go to the Audio section, there is nothing listed for turning off speakers, just adjusting the sound (bass/treble/balance.) This information was found on the Dynex ...

...will disappear. Another issue that makes this solution less than perfect is that you must hit the mute button every time you turn on the TV. There's got to be a better way, but I just can't find

...You can continue to adjust volume with the remote and it will only affect your headphones. You may need to do this each time you turn on the TV and use headphones, but that is a small

...Turn the TV off, unplug it from the wall. Hold down the power button on the TV for about 20 seconds. Reconnect it and try to turn the TV on again. If the problem persists the TV is in need of some ...

turn internal speakers off on my dynex tv model # DX42E250A12 speakers crackling-want to turn them off but dont see a "speaker" selection on the audio setup There is no such selection option to this ...

...turn off the internal speakers on my dynex tv using surround sound for sound and the internal speakers on the tv are turned all the way down but am getting LOUD crackling thru the internal speakers. ...

...tv doesn't turn the tv on. In this case, the symptoms you describe is a faulty inverter board. The TV will or should flash "PLEASE WAIT" and then you have a black screen no audio. Find Shop Jimmy on ...

...32" wont give me any sound from remote or tv but changes channels remotes do not have speakers in them and you might have turned MUTE on . having no way to see it personally there is not much we can ...

...do I turn the speakers off and use a sound bar The TV is a dynex and the speakers are blown in the TV That setting should be under audio settings, labeled something like disconnect internal ...