...turn on my computer, it says reboot and select proper boot device or insert boot media in selected boot device and press a key. what seems to be the problem here? please help. thanks. sunshine It's ...
...absoloutly nothing, then it may have drawn too much current from the USB port and shorted it out. Try something else in the USB port and see if that is working correctly like a flash drive/mouse ...
...load windows. Do you have a USB device plugged in and turned on If so tour BIOS is searching for hard drives and it takes time to find them Unplug or turn OFF all USB devices until you have ...
Question about SimpleDrive Pininfarina 320GB External USB 2.0 Hard Drive - Blue
...power options, and where it says system stand by set it to never, and turn off hard disk to never, and the turn off monitor you can set it to your needs, for example, I have mine for 20
Question about ThinkPad T30 2366 Notebook
...USB hard drive adapter or a USB enclosure. And retrieve your files if you want on another working computer. Then the laptop should go to a repair. If you are not so sure of doing this, have your ...
Question about SimpleDrive Pininfarina 320GB External USB 2.0 Hard Drive - Blue
...monitor is testing good then make sure all USB devices are disconnected and try to boot again. Then open the case and blow out any dust. Check the motherboard screws are tight. If the screws holding ...
Question about SimpleDrive Pininfarina 320GB External USB 2.0 Hard Drive - Blue
...USB devices (such as a mouse & keyboard or flash drive) at the monitor instead of the computer ports. You must use the RGB/VGA connection to use the monitor. When you turn ON the monitor, it ...
Question about HannsG HU171D 17" LCD Monitor
connect my old monitor but it just says no signal and i cant turn the monitor on wot am i doing wrong the usb port that your new hard drive needs is USB 2.0 whereas monitor has 1.0 SO IT WILL NOT WORK
...operations. -Turn the ignition switch OFF and back ON. -Disconnect the USB portable audio player/ USB memory. -Change to a different source. Then, return to the USB portable audio player/USB
Question about USB 2.0 VGA Display Adapter Catalog Category: USB/FireWire Hubs & Devices / Converters- USB
...USB, plug it back in and then about 15 minutes later turn the monitor back on and ta da it works. Other times I get the same No Signal message. This is very frustrating as I use dual monitors often. ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions
