Questions & Answers for: tv input

...TV has HDMI input connect as follows: 1. Connect an HDMI cable from the Directv box to an HDMI input on the Denon. 2. Connect an HDMI cable from the HDMI out-put on the Denon to the RCA TV 3. Select ...

...TV has HDMI input connect as follows: 1. Connect an HDMI cable from the Directv box to an HDMI input on the Denon. 2. Connect an HDMI cable from the HDMI out-put on the Denon to the RCA TV 3. Select ...

TV to Input Video 1? I am trying to add a new DVD/video recorder to my system and the JVC tech support said I need to find out how to change my 40" Mitsubishi TV -- via its remote -- to "Input Video 1

...tv has an input button that cycles thru all of the inputs. i've already checked that the inputs are listed properly on the setup page On some TV's when you first press the input button it does not ...

INPUT 4 BUT TV WILL NOT STAY ON LONG ENOUGH The reason your tv is powering down is that it is not receiving an input signal on the channel (input). basically you don't have anything plugged in and

same goes with TV button located on the front or side of it ). Once you have the input lists, check one by one in order for you to check the right input of your TV ( usually TV input ). Hope it helps

TV's Input Normally, your TV displays the signal coming through the antenna terminal. However, if you've connected another component to your TV(such as a VCR & DVD) using the Video/Audio input,you

tv is on wrong input. Be sure HDMI wire or cable input is connected to tv. Look at which input it is on. ( like HDMI 1. Or cable etc. take tv remote (with cable box on ) press input / video button and

...TV input, Coax IN and OUT or AUX input (I don't remember if this model had HDMI). On the back of your TV, there should be an AUDIO OUT, connect this to either the TV or AUX inputs and make sure on ...

...TV Input Menu Scrolling Have you got any other remotes in the room that could be faulty or interfering with the WDTV. Also: try resetting via the side button with the unit on. resetting to factory ...