Questions & Answers for: Mitsubishi tv signal tester

...TV shop in your area and ask if they have an IR (infrared) tester; these are primitive devices but they will tell you if the remote is putting out some kind of signal. If you find it is bad, you can ...

tv channel signal or not) to the antenna port of my mitsubishi 50" projection tv and tv's display turned off after 5 seconds and it is not getting turned on. Is it because of the internet signal short

...Signal no Color Hi, I have an issue where only my 480i signals look horrible. There is virtually no color, looks almost black and white and there are light bands running vertically all across the ...

...signal to your TV. However if you are using an antenna to receive your broadcast, then you will need a converter. Broadcast TV (over the air) has switched to a digital signal for most of the channels ...

NO SOUND OR PICTURE JUST SNOW WAS WORKING FINE THE DAY BEFORE Check the tv with another cable signal or another tv with that cable signal.Both check,same things happen.Ur tv digital tuner is dead.

...TV will display all High Definition signals as 1080i True HDTV? and all standard definition signals will be displayed as 480p. Component Inputs 1-2 YPbPr(480i/480p/1080i) These inputs can be used for ...

TV is receiving. By that I am referring to the signal the cable box or DVD player is sending to it. You need to make the 1080p adjustment on the HDMI device (PS3, DirecTV box, etc). The display of the

my 1994 3000gt has no rear license plate light tail lights work ,brake lights work turn signals work , and ive checked all the fuses and replaced the bulbs several times,and i checked the sockets with

signal to the TV, and the high voltage and therefore picture are shut off to protect the high voltage system. Make sure there is a good, strong signal to test it from, like a DVD player, otherwise the

...TV and the signal source (cable or satellite box) are turned on and properly connected. Check that the cables are securely plugged in to the TV and the signal source. Make sure that the TV is set to ...