Questions & Answers for: tv signal tester Cars & Trucks

...signal and brake lights work as advertised but the running and marker lights do not work. fuses checked good. You can purcahse a tester which will connect into the F-150's wiring harnes. If the led ...

...not light up. I have replaced all bulbs with no positive results. The left signal works fine, both front and rear. it could be bad socket get a 12volt tester or it is in the turn signal switch ...

...signal tester(noid light) and finally compression guage, rad tester optional, check spark and injector signal, the remove spark plugs and note their color, do a compression test, all cylinders should ...

...on it and the tester said it is looking for the timing signal. He said he didn't know what to do about it. w/o knowing the code...i would guess you should look into the cranka nd cam sensor

...TESTER YOU MUST HAVE A BAD BRAKE LIGHT SWITCH OR A BAD TURN SIGNAL SWITCH. THE BRAKE LIGHT CIRCUIT GOES UP THROUGH THE TURN SIGNAL SWITCH & THEN TO THE BRAKE LIGHTS. FIRST OF ALL IS THE BRAKE ...

...tester. That same contact would or should have a blinking test light, with the key on and the right turn signal on. I would not be surprised if you need a new assembly. Possibly, too, the ground for ...

...tester will indicate whether it is working or not. There will be batteries there as well. Some testers are go-nogo machines. Some will register a weak signal, letting you know the fob works but the ...

...signal left front turnsignal cracked, need replacement AllScanner VCX-PLUS MULTI (Piwis Tester II For Porsche V14.0) See here: AllScanner VCX PLUS MULTI Piwis Tester II For Porsche V14 0 LAND ROVER ...

...Signal switch. Depending on the year you should be able to order one or most Autozones carry them in stock. I would stay away from a generic one that fits most. Try and get a OEM switch. One more ...

...signal/hazard flasher, and still nothing. I back probed the socket wire with the turn switch engaged and the tester light flashed. What do I check next? I only have a tester light and no multimeter. ...